item8b
item8b
TANK LEVEL ALARM
LIQUID LEVEL CONTROLLER (LC-3)

The Gizmo Engineering LIQUID LEVEL CONTROLLER turns pumps on and off based on float switches to regulate liquid level automatically.. Accepts an inputs for an emergency high or low level alarm. Versatile operation modes, but very easy to set up.

Pump Controller

Automatic Tank Filling...

  • Emergency High Level Alarm in case the level overfills, a separate float switch dedicated to over filling.
  • Loud 103dB warbling tone cuts through the loudest industrial noise.
  • Rugged. Built for rough, wet and corrosive environments. NEMA 4X rating.
  • Reliable. Floats are protected inside a pipe and completely screened in.
  • High capacity. 15A relay will control up to 1/2 HP @ 120V.
  • DIY. Floats can be easily wired to screw terminal blocks.
  • Versatile. Switch between pump-down or pump-up operation snooze alarm.
  • Compact Box measures only 4 x 4 x 2 inches. (100x100x50 mm)
IMG1953

TANK LEVEL CONTROLLER -MODEL LC-3

Automatic tank filling...
The LC-3 liquid level controller will automatically cycle your pump or solenoid to keep your tank at the proper level. Install your own float switches and just plug in AC power. 15A relay will control pumps up to 3/4HP @120VACor 2HP@208V.

Operation
For filling applications, the level controller turns on your pump to fill the tank when liquid level drops to the "low level control float". When the liquid level rises to the "high level control float", the relay opens to shut off your pump. The cycle repeats automatically as needed to properly control liquid level. Can be switched from tank filling to tank emptyting with a jumper setting on the circuit board.

Emergency Level Alarm Included
If there is a problem that causes the liquid level to rise above the high level-control float, a third "emergency" float causes an alarm with a flashing beacon LED and loud warbling buzzer that can be heard through any industrial plant noise. The emergency alarm float is also a redundant relay shutoff. When the button is pushed the buzzer silences while the beacon LED continues to flash. The default setting is to have the buzzer sound again every 30 minutes until the condition is corrected. Everything resets automatically when the level is corrected.

Application
Suitable for lift pump chambers, sump pump basins, holding tanks, sewage, agricultural and other applications. If an alarm condition occurs, the horn sounds and red alarm beacon activates.

Sealmoneyback1
We want only happy customers.
click

PayPal Logo

VeraSafe Security Seal

INSIDE VIEW

REMOVABLEFLOATGUARD

Installation
The Pump Controller is designed to be quickly installed and working in a few minutes with no tools. Simply mount it on the wall and connect your float wires to the correct terminals. If you prefer to have everything pre-wired with float switches included please see the model LC-2 tank level controller.

TYPICAL FLOAT SWITCH SETUP

Options
There are many options to make this suitable for your application, wireless transmitters, various mounting adapters, screens to protect the floats in dirty liquids, different materials of construction. Please inquire if you don't see exactly what you require.

INSTRUCTIONS
BROCHURE
_______________________________________________________________________________

ORDER LC-3

Longest Probe Depth
Enter level probe depths

_______________________________________________________________________________
Rim Mount Bracket A bracket designed
Rim Mount Bracket

$29
CLICK FOR INFO
Different Buzzer Tones

Tone Type

Different Buzzer Tones
Mounting Options
Tank Alarm Plate closeup IMG0002 Tank alarm bulkhead feecthrough mount Tank Alarm flange
Tank alarm BULKHEAD feedthrough mount FLANGE
BENT PLATE
FLAT PLATE

Type

Buzzer Volume Control Snap-on "muffler" reduces
BuzzerMuffler
$5

Questions?

Phone 585-301-0970
email: peter@drumalarm.com

item8b

hit counter

Engineering RedBall1 Gizmo INSTRUCTIONS BROCHURE