item8a
item8a
TANK LEVEL ALARM
AC POWERED PROCESS TIMER -

PUSH BUTTON TIMER that counts down from the time you set, then it beeps and flashes. Waterproof, corrosion proof and built for rough use. Relay output to control pumps. Ideal for plating, spas, wet areas.

PROCESS TIMER

A Better Process Timer ...

  • Time is easily adjustable from 1 second to 99 hours using discrete pushbuttons. No guessing with potentiometers!
  • Easy installation! Simply screw it in place and connect your pump - no hard wiring.
  • Waterproof proof and corrosion proof. PVC enclosure and push button are NEMA 4X rated. Built for rugged industrial service.
  • Low profile - 4x4x2" PVC box extends out from tank only 85 mm (3.3").
  • Relay output 15A @ 120VAC to control 1/2HP pumps, motors. Convenient connection to your pump with the piggyback plug provided.
  • 103 dB audio alarm.

TIMER MODELT3

Easy installation, just mount it in place and plug in the piggyback plug. A single button starts and stops the timing cycle.

The time is set easily with the intuitive pushbutton switches and digital indicator inside the box. No calibrating or guessing is necessary as with timers that use potentiometers. The time is accurate to the second. Once the time is set, you can close the cover and not worry about the time being tampered with.

IMG_1004

Wide Timing Range
Counts down anywhere between 1 second to 99 hours, and anywhere in between.

Relay Output
Relay output is 10A @120 VAC. (1/2 HP at 120V) Normally Open by default, (relay is open when not timing) or specify Normally Closed.

Operation
The time counts down from preset time. Exterior button illuminates while timing. At the end of the time cycle, the alarm beeps 5 times and then relay resets automatically. The cycle may be cancelled at any time by pushing the external illuminated button.

Select from many different operaing modes available by setting the on-board jumpers. With these modes you can control if the cycle may be cancelled in mid-cycle or not, if the cycle stops automatically or requres manual stoppage using the pushbutton, and repeating cycles etc. See instruction sheet for full details.

Power
The T3 timer is powered from the piggyback cord running from your pump. (120VAC)

Other Applications
The time cycle can be started by other electrical triggers instead of the push button, such as proximity switches, wireless relays, signals from other machines. Please call Gizmo Engineering for help with these custom applications.

INSIDE VIEW OF TIMER T3

Sealmoneyback1
We want only happy customers.
click

PayPal Logo

VeraSafe Security Seal

SPECIFICATIONS

GENERAL

  • Pushbutton............................................. 22mm diameter
  • PVC enclosure rating ............................ NEMA4X / IP65
  • PVC enclosure size...........................................4 x 4 x 2"
  • Buzzer volume.............................................103dB @ 2ft
  • Power cord.........................8 ft, SJOOW jacket, 3 x14ga
  • Relay output............................................ 10A@277VAC
  • Relay mode..........................N.O or N.C. terminal blocks
  • Circuit operation........................................12VDC, 85mA
  • Timing range....................................1 second to 99hours
T3 INSTRUCTIONS
BROCHURE
BOX DIMENSIONS

_______________________________________________________________________________


T3 Timer $207

InStock
item8a

hit counter

Engineering RedBall1 Gizmo T3 INSTRUCTIONS  BROCHURE  BOX DIMENSIONS