
Very large timer LCD works like our other countdown timers but has a display that measures 6″ across by 2″ height. 50mm diameter stack light.
The large display is our largest and most visible.
It can act as a slave display to mimic the display on another smaller timer in a different location.
The increased size allows it to accommodate various options: larger relays, wireless transmitters, WIFI communication with phones and computers, and custom projects for more complicated timing cycles.
The T7 includes volume control muffler.
Can be adapted to any country with a plug convertor
T6 instructions (current)
V002-25 modes chart including modes 14 & 15. (current)
OLDER DOCUMENTS
Logic chart for firmware V002-19 including new modes 12 & 13.
- Enclosure material………………………………………..ABS
- Gasket material……………………………………………solid rubber
- Ingress rating……………………………………………….IP65
- LED lens cover……………………………………………..Lexan
- Cover screws………………………………………………..ABS
- Front pushbutton………………………………………….22 mm
- Side (blue) pushbuttons………………………………..12mm, aluminum bezel
- Temperature range……………………………………….-40ºC to 50ºC
- Enclosure dimensions………………………… 7 x 9 x 3 inch
- Display opening…………………………………156 x 58mm [6.1 x 2.3″]
- Digit height……………………………………… 48 mm
- Timing accuracy…………………………………± 0.02% (17 sec. /day)
- Power consumption when alarming …………30mA @120VAC
- Sound pressure level …………………………103dB @ 2 feet
- Ingress Protection level ………………………IP65 (NEMA 4X)
CAD drawing of the enclosure
Other options like solenoid valves and proximity sensors are added on as separate line items since they are detachable.
EXAMPLES OF VALID PART NUMBERS
T7
T7-S2
T7-S3
T7-0 (often used with panel LEDs)
Below are the modes that are standard in the timer for firmware version 002-19
- Mode 1 counts down or up from the set time. T5-S3 default. video
- Mode 2 like mode 1 but does not allow cancellation. video
- Mode 3 – vacant
- Mode 4 – allows pausing and resuming the cycle. Used for T4 timer.
- Mode 5 stops automatically at the end of cycle. video
- Mode 6 provides an early warning on the beacon LED. T5 default. video
- Mode 7 is a guard duty which is used by the T5G product.
- Mode 8 is for spray rinses in plating operations. Must be custom ordered. video
- Mode 9 is a custom mode which counts machine run-time. video
- Mode 10 – vacant
- Mode 11 is a repeating cycle. video
- Mode 12 has the relay on during and after the countdown for flushing rinse tanks.
- Mode 13 the relay activates after the countdown to either add chemistry, or flush tanks.
- Mode 14 is a production pacing (Andon) timer and also has a stop-and-start. video
- Mode 15 provides a lockout period. video
- Mode 16 – vacant
Order Here
T7
3 STACK LIGHT TIMER
Options
MAGNETIC MOUNT
Four rare-earth magnets encapsulated in rubber allow the units to be mounted on metal surfaces like ovens. High friction, very strong so the timer stays put.
[MM4]
$29
Calibration Certificate
NIST traceable certification by Gizmo Engineering.
Direct comparison method. Certificate will be shipped with the timer and include actual test results for the timer being calibrated. This option adds 1 day to shipping times. Certification details.
[CAL-2] $55
Calibration Certificate
NIST traceable certification by Transcat laboratory. Time base method. Certificate will be shipped with the timer. Certificates are also available online through our lab’s website. This option adds 2 weeks to shipping time. Certification details.
[CAL-1] $90